The significant differences between Fischer-Tropsch synthetic waxes and polyethylene waxes (PE waxes) are: 1, Molecular weight. The molecular weight of Fischer-Tropsch wax is much lower than that of PE wax, and the branched chain is also less, with high crystallinity, which is easy to penetrate into the high-viscosity macromolecular chain and significantly reduce the melt viscosity, with little migration during processing and obvious lubricating effect in the later stage. 2, Fischer-Tropsch wax is saturated direct alkane, does not contain double bond, strong antioxidant ability, good weather resistance. 3, Viscosity of Fischer-Tropsch wax is much lower than PE wax. It is only about 10. The same lubricating effect can be achieved with less dosage. The use amount is only 70-80% of PE wax. Fischer-Tropsch wax is more compatible with PVC and can be competent as both internal and external lubricant. It can be used as a good internal lubricant to effectively control shear conditions, promote flow, control friction and melt properties, thus improving thermal stability. Fischer-Tropsch waxes give the best physical and processing properties to PVC products due to their high crystallinity and linearity structure. Depending on the need, Fischer-Tropsch process can synthesize alkanes of different chain lengths to change the molecular weight of the final product and form a series of products. These 3 are the differences between ft wax vs pe wax, feel free to contact our wax experts.