Technical Parameters
Nature of the Products
LW-109C
Appearance
off- white emulsion
pH
3-6
Solid content
40%
Ionic nature
Non
Sample
Support
Cellulose (mainly cotton and linen) and its ...
Joncryl 35 is an additive offered by BASF. Joncryl 35 is a fine particle size polyethylene wax emulsions for use in water-based industrial and decorative coatings.
OE-6301 is offered by tianshiwax,...
SASOLWAX C80 is an additive offered by Sasol. Sasolwax C80 is supplied in the form of white pastilles packed in 20kg paper bags or 600kg Jumbo bags. In the form of coarse powder packed in 20kg paper b...
Following are 5 hazards of foam from water-based paint:
1, When using paint through spraying, rolling or silk-screening, etc., internal foam appears, which affects product quality
2, Foam prevents t...
In recent decades, China's coatings industry has gradually developed from a small and unremarkable industry to an important industry in all areas of the national economy, it can be said that a quality...
For the reason that the coating is easy to produce bubbles during the construction process, we discuss in three steps
(1) How does the vapor bubble in the coating film arise? Vapor bubble is the ga...
In fact, these foams are mainly caused by mixing, equipment, added additives, raw materials and other reasons. If these foams are not treated, it will have an impact on the quality, appearance, cost, ...
From the morphological point of view, paint defoamers are divided into solid, liquid and powder. According to the current general view, defoamers for coatings are mainly divided into three categories:...
Leave a message