Technical Parameters
Nature of the Products
LW-109C
Appearance
off- white emulsion
pH
3-6
Solid content
40%
Ionic nature
Non
Sample
Support
Cellulose (mainly cotton and linen) and its ...
SASOLWAX C80 is an additive offered by Sasol. Sasolwax C80 is supplied in the form of white pastilles packed in 20kg paper bags or 600kg Jumbo bags. In the form of coarse powder packed in 20kg paper b...
Following are 5 hazards of foam from water-based paint:
1, When using paint through spraying, rolling or silk-screening, etc., internal foam appears, which affects product quality
2, Foam prevents t...
For the reason that the coating is easy to produce bubbles during the construction process, we discuss in three steps
(1) How does the vapor bubble in the coating film arise? Vapor bubble is the ga...
In fact, these foams are mainly caused by mixing, equipment, added additives, raw materials and other reasons. If these foams are not treated, it will have an impact on the quality, appearance, cost, ...
Silicone defoamer is refined through a special process, with the advantages of easy dispersion, strong defoaming ability, versatility, long-lasting foam inhibition, etc., using a small amount of addit...
According to the composition, coating defoamer is divided into mineral oil, polyether, silicone, polyether modified silicone, etc.. You can choose defoamer according to the defoaming requirement of th...
In the process of producing thick paste type coatings, we often encounter some special foam problems. How to choose the right one from a large number of defoamers?
Following 3 Tips for choosing def...
Leave a message