Micronized PE wax is a non-toxic, odorless, non-corrosive, white or slightly yellowish solid with a relative molecular mass of 1800-8000. polyethylene micronized wax should be widely used because of its excellent cold resistance, heat resistance, chemical resistance and abrasion resistance. Micronized PE wax can prepare high gloss solvent-based coatings water-based coatings, powder uncoatings, can coatings, UV curing, metal decorative coatings, etc. It can also be used as daily moisture-proof coatings such as cardboard. Micronized PE wax price is suitable, which can be used to prepare letterpress water-based ink, solvent-based gravure ink, lithographic/offset printing, ink, overprint varnish, etc. Micronized PE wax has two requirements: namely, it cannot affect the leveling of the coating and its sensitivity to water when improving the surface slip and hardness of the coating film. PE wax powders can be prepared as hot melt adhesive for stamping, also as isolating agent for cast metal parts, foam parts, rubber and plastic sheet and pipe additives, also as rheological modifier and current variant for violet oil, and as carrier and lubricant for masterbatch. Tianshi wax powders are easy to disperse, can be used in plastic coatings, wood paints, powder coatings, coil coatings, UV light-curing coatings and various solvent-based ink products, for temperature requirements are not high, to improve its lubricity and scratch resistance.