How to Choose and Clean Waxed Fruits

Posted on 2021-03-08
It is said by the nutritionists that apple's peel is more nutritious than the pulp and is more recommended. What if the waxed apple peel? In fact, in China it is allowed to wax the fruits' peel for preservation. Fruit waxing is an important part of post-harvest commercialization and an important means to improve the competitiveness of fruits. The post-harvest waxing rate of fruits in developed countries is 80%~90%. The main components of common commercial wax commonly both home and abroad are shellac, beeswax, resin, OPE wax, carnauba wax or candelilla wax. The air permeability of the shellac and resin with higher luminance are inferior to that of the OPE, candelilla wax and carnauba wax. Pure natural shellac and carnauba wax are edible, with no harm to the body. However, many unscrupulous manufacturers have replaced edible waxes with industrial ones to save costs. There is an essential difference between them. Industrial wax is extracted from petroleum, which contains mercury and lead. They can penetrate into the pulp through peel and cause damage to human body.   How to choose Firstly, appearance: If the fruits are brightly colored and the surface is smooth and translucent, usually they are waxed. Secondly, smell: After waxing, the scent of fruit is dispersed. In addition, industrial wax is slightly pungent. Lastly, scraping: A layer of white wax will reveal using fingernail or fruit knife. Gently wipe with hand or napkin. If it is light red, it must be waxed with industrial wax.   How to clean With hot water: Wax is molten when heated. Put the waxed fruit in hot water. You will see a layer of wax floating on the water. Then timely dump it. With salt: Salt helps friction because of its small particle, and it is also featured with disinfection. With toothpaste: Apply toothpaste to the surface of the fruit as cleanser. The activator therein can easily bring out the dirts on skin. With special product: There are special detergent for fruits and vegetables in the market. Physical cleaning is preferred, instead of worrying about chemical residues.

Related News

  • Yarn smoothing agent wax emulsion LW-109C 2022-11-16
    Technical Parameters Nature of the Products LW-109C Appearance off- white emulsion pH 3-6 Solid content 40% Ionic nature Non Sample Support Cellulose (mainly cotton and linen) and its ...
  • Sasolwax C80 vs TP-80B 2022-05-20
    SASOLWAX C80 is an additive offered by Sasol. Sasolwax C80 is supplied in the form of white pastilles packed in 20kg paper bags or 600kg Jumbo bags. In the form of coarse powder packed in 20kg paper b...
  • The hazards of foam from water-based paint 2021-08-29
    Following are 5 hazards of foam from water-based paint: 1, When using paint through spraying, rolling or silk-screening, etc., internal foam appears, which affects product quality 2, Foam prevents t...
  • Reasons for bubbles in the coating during construction 2021-08-29
    For the reason that the coating is easy to produce bubbles during the construction process, we discuss in three steps (1) How does the vapor bubble in the coating film arise? Vapor bubble is the ga...
  • Causes of water-based paint foaming 2021-08-29
    In fact, these foams are mainly caused by mixing, equipment, added additives, raw materials and other reasons. If these foams are not treated, it will have an impact on the quality, appearance, cost, ...

Leave a message

Contact Us
Your name(optional)

* Please enter your name
* Email address

Email is required. This email is not valid
* How can we help you?

Massage is required.
Contact Us

We’ll get back to you soon

Done