HY-302 coating thickener is a high molecular water-based acrylic thickener. It can provide coating low shear viscosity, good open can effect, with good thickening effect and good fluidity. The product has excellent performance and high cost performance. 　　Main indicators Component composition: anionic polyacrylic acid alkali-soluble swelling Appearance: white emulsion Solid content: 20%                              Application scope Water-based coatings, also can be used for thickening of various fabric coating adhesives. micronized ptfe coating are also available. Recommended dosage The recommended addition amount is 0.2-0.8% of the amount of latex paint. Use method Before use, the ph value of the system should be adjusted to 8-9, then dilute HY-302 with water in the ratio of 1:1, add slowly under stirring, and adjust the paint to the required viscosity. Product features 1,  The emulsion paint system thickened with HY-302 is loose in sedimentation and easy to stir. 2,  It has good thixotropy and good open can effect. 3, It can also be used for thickening of various fabric coating adhesives. 　Packing and storage 30kg/barrel, should be sealed, placed in a cool, dry and ventilated place, protected from freezing and direct sunlight. Caution If it cannot be used up at one time, the cap should be tightened to prevent evaporation.