Technical Parameters: Characteristics and Purposes Ø PEW-0278A is HDPE wax, with high softening point, heat resistance, high hardness, and very good dispersity. Ø PEW-0278A is suitable for solvent-based printing inks which can greatly improve the abrasion resistance. PEW-0278A can reduce the coefficient of friction, and has good adaptability with benzene-soluble ink, alcohol-soluble ink, and ester-soluble ink. Ø PEW-0278A provides excellent abrasion and scratch resistance for a variety of surface coatings, can be widely use in plastic paint, coil coatings, wood coatings, industrial paints and other fields. Ø Be used in powder coating, PEW-0278A can provide high hardness, can increase the scratch resistance, and can assist in matting. Will not smoke under 180 ℃ baking. Addition level and Processing instructions Ø In a variety of systems, the addition amount of micronized wax is generally between 0.2 to 3%. Ø Usually by way of a direct high-speed stirring, it can disperse in solvent-based coatings and inks. Ø It can be added by using a variety of grinding machines, and high-shear dispersing device. Must pay attention to the control of temperature. Ø Can make a wax pulp with the wax concentration at 20-30% by pre-dispersing treatment, add it into the systems when needed, by which can reduce the dispersion time. Packaging and Storage Ø Paper-plastic bag, net weight: 20 kg / bag. Ø This product is non-dangerous goods. Please store it away from ignition sources and strong oxidants.