Micronized Polishing Wax Twax-0507

Posted on 2021-01-19
Technical Parameters:
Nature of the Products Twax-0507
Appearance Light yellow Powder
Particle Size μm
Dv50 6-7
Dv90 14
Melting Point ℃ 80
Characteristics and Purposes Ø The coating can give mirror effect after polishing with adding PEW-0507 in the formula, the polished surface with high hardness, good transparency, good wear resistance, and will not return sticky under high temperature. Ø PEW-0507 can disperse in solvents like xylene, solvent oil directly, and can dissolve in various solvents when heated. Sprayed the formula to wood, stone, metal, or any other coating surfaces, then polish by using cloth round. Ø Can make polishing powder, polishing paste or polishing solution by adding various kinds of grinding material. Ø PEW-0507 can partially replace carnauba wax, to provide good gloss and transparency. Contents and Methods of Use Ø In a variety of systems, the additional amount of the micronized wax is generally between 0.5-20%. Ø Usually by way of a direct high-speed stirring, it can disperse in solvent-based coatings and printing inks. Ø Can be added through a variety of grinding machines, and a high shear dispersion device. Packaging and Storage Ø Drum, net weight: 20kg / barrel. Ø This product is non-dangerous goods. Please store in a place away from ignition sources and strong oxidants.

Related News

  • Yarn smoothing agent wax emulsion LW-109C 2022-11-16
    Technical Parameters Nature of the Products LW-109C Appearance off- white emulsion pH 3-6 Solid content 40% Ionic nature Non Sample Support Cellulose (mainly cotton and linen) and its ...
  • Sasolwax C80 vs TP-80B 2022-05-20
    SASOLWAX C80 is an additive offered by Sasol. Sasolwax C80 is supplied in the form of white pastilles packed in 20kg paper bags or 600kg Jumbo bags. In the form of coarse powder packed in 20kg paper b...
  • The hazards of foam from water-based paint 2021-08-29
    Following are 5 hazards of foam from water-based paint: 1, When using paint through spraying, rolling or silk-screening, etc., internal foam appears, which affects product quality 2, Foam prevents t...
  • Reasons for bubbles in the coating during construction 2021-08-29
    For the reason that the coating is easy to produce bubbles during the construction process, we discuss in three steps (1) How does the vapor bubble in the coating film arise? Vapor bubble is the ga...
  • Causes of water-based paint foaming 2021-08-29
    In fact, these foams are mainly caused by mixing, equipment, added additives, raw materials and other reasons. If these foams are not treated, it will have an impact on the quality, appearance, cost, ...

Leave a message

Contact Us
Your name(optional)

* Please enter your name
* Email address

Email is required. This email is not valid
* How can we help you?

Massage is required.
Contact Us

We’ll get back to you soon

Done