Micronized PTFE Wax PTFE-0104

Posted on 2021-01-06
Technical Parameters:
Nature of the Products PTFE-0104
Appearance White Powder
Particle Size  μm
Dv50 4-5
Dv90 10
Melting Point ℃ 320
Characteristics and Purposes Ø The micronized wax PTFE-0104 has very good heat resistance and lubricity that can be used in engineering plastics, lubricating oil and grease, non-stick coatings, cable and other industries. Ø Can provide the products with very low friction coefficient when added into coatings and inks, PTFE-0104 has excellent abrasion and scratch resistance and sliding property. This product has excellent sliding degree in the coating and printing ink. Ø Its molecular weight is usually one percent of the commonly used PTFE resin, it not only keep the original excellent properties, but also has the advantages of high crystallization degree,good dispersion, and easy to mix with other materials. Ø In powder coating application, the micronized PTFE wax provides a distinct performance on scratch resistance. Ø In paints and printing inks applications, PTFE-0104 provides an excellent smoothness (slip). In printing inks, an additional amount of 0.1% ~ 3% can significantly improve the sliding properties of ink, and can enhance the scratch resistance in printing products; it can avoid the adhesion of the paper products. Contents and Methods of Use Ø In a variety of systems, the additional amount of the micronized wax is generally between 0.1to 3%. Ø Usually by a direct high-speed stirring, it can disperse in solvent-based coatings and printing inks. Ø It can be added by a variety of grinding machines, high-shear dispersing device, and should pay attention to the temperature control when using the grind mill. Ø Can carry out the decentralized processing to make the wax slurry with the wax powder concentration at 20-30%., then add it into the systems when needed, which can decrease the dispersion time Packaging and Storage Ø Drum, net weight: 25kg / barrel. Ø This product is non-dangerous goods. Please store it away from ignition sources and strong oxidants. Ø Do not smoke while operating the micronized PTFE wax, avoiding the micronized wax to touch the cigarette-burns because it can produce some toxic gases that maybe inhaled.

Related News

  • OE-6301 VS Joncryl 35 2022-05-20
    Joncryl 35 is an additive offered by BASF. Joncryl 35 is a fine particle size polyethylene wax emulsions for use in water-based industrial and decorative coatings. OE-6301 is offered by tianshiwax,...
  • Tips for choosing defoamer for thick paste type coatings 2021-08-28
    In the process of producing thick paste type coatings, we often encounter some special foam problems. How to choose the right one from a large number of defoamers? Following 3 Tips for choosing def...
  • Defoamer and the relationship between coatings 2021-08-27
    In recent decades, China's coatings industry has gradually developed from a small and unremarkable industry to an important industry in all areas of the national economy, it can be said that a quality...
  • Causes of water-based paint foaming 2021-08-27
    In fact, these foams are mainly caused by mixing, equipment, added additives, raw materials and other reasons. If these foams are not treated, it will have an impact on the quality, appearance, cost, ...
  • Suitable for coating with defoamer - refined process silicone defoamer 2021-08-27
    Silicone defoamer is refined through a special process, with the advantages of easy dispersion, strong defoaming ability, versatility, long-lasting foam inhibition, etc., using a small amount of addit...

Leave a message

Contact Us
Your name(optional)

* Please enter your name
* Email address

Email is required. This email is not valid
* How can we help you?

Massage is required.
Contact Us

We’ll get back to you soon

Done