News

PE Waxes for Color Masterbatch, Masterbatch

Posted on 2021-03-10
PE Wax for Color Masterbatch, Masterbatch
Grade Dropping Point Viscosity Penetration Physical  Form
  (℃) mPa.s@140℃ dmm@25℃  
PEW-0320A 105 <50 7 Power
PEW-0360B 110 400 3 Micro Powder
PEW-0300 114 20/40/100 7 Micro Powder
TS5204 105 20-40 6 Power
TS5205 100 30-60 3 Power
TS5240 105 ＜400   Power
TS5290 106 ＜900   Power
Performances and features
  1. High molecular weight, high viscosity, narrow melting range, good dispersibility for pigments and inorganic powders, improved gloss of products, prevention of color points, and enhanced pigmentation of pigments.
  2. Excellent wettability to powder, improves fluidity, shortens mixing time and improves processing efficiency.
  3. Good temperature resistance, no smoke, keep the balance of lubrication and dispersion system
Recommended Application Suitable for filling masterbatch, color masterbatch and rubber&plastic products processing.  
Previous : PE Waxes for Color Masterbatch, Masterbatch
Next : OE-6302 is Water-based Wax Emulsion for Varnish

Related News

  • Yarn smoothing agent wax emulsion LW-109C 2022-11-16
    Technical Parameters Nature of the Products LW-109C Appearance off- white emulsion pH 3-6 Solid content 40% Ionic nature Non Sample Support Cellulose (mainly cotton and linen) and its ...
  • Sasolwax C80 vs TP-80B 2022-05-20
    SASOLWAX C80 is an additive offered by Sasol. Sasolwax C80 is supplied in the form of white pastilles packed in 20kg paper bags or 600kg Jumbo bags. In the form of coarse powder packed in 20kg paper b...
  • The hazards of foam from water-based paint 2021-08-29
    Following are 5 hazards of foam from water-based paint: 1, When using paint through spraying, rolling or silk-screening, etc., internal foam appears, which affects product quality 2, Foam prevents t...
  • Reasons for bubbles in the coating during construction 2021-08-29
    For the reason that the coating is easy to produce bubbles during the construction process, we discuss in three steps (1) How does the vapor bubble in the coating film arise? Vapor bubble is the ga...
  • Causes of water-based paint foaming 2021-08-29
    In fact, these foams are mainly caused by mixing, equipment, added additives, raw materials and other reasons. If these foams are not treated, it will have an impact on the quality, appearance, cost, ...

Leave a message

Contact Us
Your name(optional)

* Please enter your name
* Email address

Email is required. This email is not valid
* How can we help you?

Massage is required.
Contact Us

We’ll get back to you soon

Done