Polyamide waxes in coatings

Posted on 2021-07-23
Polyamide wax thickener is a thixotropic additive that forms a strong network structure in the paint system with powerful thixotropic properties, good anti-sagging ability and anti-settling ability. Polyamide wax: a thixotropic additive. Its has been effectively activated by solvent, forming a strong network structure in the paint system with its excellent thixotropic performance, excellent anti-sagging ability and anti-settling ability. Polyamide wax scope of application: Suitable for non-aliphatic hydrocarbon solvent system. Composition: Polyamide wax. Active part content: 20%. Appearance: Milky white, paste-like. Dosage (to total formulation): 0.1-2%. The effect of polyamide wax on solvent-based coating viscosity: micronized polyamide wax is mostly emulsified in natural paraffin wax to produce polarity, and then put into xylene to pre-expand to generate paste thixotropic agent, its expansion structure into a network, has very good strength and heat resistance, good storage stability, has excellent anti-sink effect in the coating system, can improve the thixotropy of the coating.

Related News

  • Yarn smoothing agent wax emulsion LW-109C 2022-11-16
    Technical Parameters Nature of the Products LW-109C Appearance off- white emulsion pH 3-6 Solid content 40% Ionic nature Non Sample Support Cellulose (mainly cotton and linen) and its ...
  • Sasolwax C80 vs TP-80B 2022-05-20
    SASOLWAX C80 is an additive offered by Sasol. Sasolwax C80 is supplied in the form of white pastilles packed in 20kg paper bags or 600kg Jumbo bags. In the form of coarse powder packed in 20kg paper b...
  • The hazards of foam from water-based paint 2021-08-29
    Following are 5 hazards of foam from water-based paint: 1, When using paint through spraying, rolling or silk-screening, etc., internal foam appears, which affects product quality 2, Foam prevents t...
  • Reasons for bubbles in the coating during construction 2021-08-29
    For the reason that the coating is easy to produce bubbles during the construction process, we discuss in three steps (1) How does the vapor bubble in the coating film arise? Vapor bubble is the ga...
  • Causes of water-based paint foaming 2021-08-29
    In fact, these foams are mainly caused by mixing, equipment, added additives, raw materials and other reasons. If these foams are not treated, it will have an impact on the quality, appearance, cost, ...

Leave a message

Contact Us
Your name(optional)

* Please enter your name
* Email address

Email is required. This email is not valid
* How can we help you?

Massage is required.
Contact Us

We’ll get back to you soon

Done