News

Polyethylene Wax for Solvent-based Printing Ink PEW-0391

Posted on 2021-03-31
Technical Parameters
Nature of the Product PEW-0391
Appearance White Granule
Oil Content % <1
Melting Point  ℃ 110±3
Viscosity      CPS ＜15
Characteristics and Purposes
  • With the characteristics of high melting point, high hardness, and low viscosity, PEW-0391 can be widely used in plastic, hot melt adhesive, coatings & inks, cosmetics, textiles, rubber additives, mold, car care, floor care, shoe polish, candle products, etc. In some solvent-based offset and gravure printing ink, PEW-0391 can provide good abrasion resistance and scratch resistance effect, the additive amount is about 0.5-2%.
  • PEW-0391 can be used in hot melt road marking paints; the additive amount is about 5-20%.
  • In other industries, the additive amount is normally at about 1-20%.
Packaging and Storage
  • Plastic-paper bag, Net weight: 25kg/bag.
  • The product is not classified as a hazardous material, please store in a place away from ignition sources and strong oxidants.
 
Previous : Application Experiment of PTFE in Lubricating Grease
Next : Application of polyethylene wax emulsion in plastic

Related News

  • Defoamer and the relationship between coatings 2021-08-29
    In recent decades, China's coatings industry has gradually developed from a small and unremarkable industry to an important industry in all areas of the national economy, it can be said that a quality...
  • What types of paint defoamers? 2021-08-29
    From the morphological point of view, paint defoamers are divided into solid, liquid and powder. According to the current general view, defoamers for coatings are mainly divided into three categories:...
  • What is defoamer in paint? 2021-08-28
    According to the composition, coating defoamer is divided into mineral oil, polyether, silicone, polyether modified silicone, etc.. You can choose defoamer according to the defoaming requirement of th...
  • Water-based coating defoamer performance 2021-08-28
    The study was conducted for water-based coatings, focusing on the defoaming properties and color spreading properties of water-based coatings. By adjusting the formula, we studied the effect of water-...
  • Reasons for bubbles in the coating during construction 2021-08-27
    For the reason that the coating is easy to produce bubbles during the construction process, we discuss in three steps (1) How does the vapor bubble in the coating film arise? Vapor bubble is the ga...

Leave a message

Contact Us
Your name(optional)

* Please enter your name
* Email address

Email is required. This email is not valid
* How can we help you?

Massage is required.
Contact Us

We’ll get back to you soon

Done