Tianshi wax emulsion create higher performance for water-based coatings

Posted on 2021-02-21
Water-based coating is an environment-friendly product which represents one of the development trends of the coating industry. It mainly includes leather coating, wood coating, floor coating and decoration paint. It is also gradually promoted in metal protection, plastics and automotives. Water-based varnish is colorless, odorless and free of volatile organic compound. With good gloss, folding resistance, abrasion resistance and chemical resistance, it is widely applied to printing inks and packaging including food, drugs, playing cards, cigarette, children's toys and other special commodities. It can obtain water resistance, abrasion resistance, adhesion resistance, scratch resistance and better hand feeling by the method of adding wax emulsion in water-based coatings and water-based varnish. In recent years, wax emulsion with high gloss, high permeability and high abrasion resistance is the higher requirement for water-based coatings and water-based varnish.

New Products

The new wax emulsion OE-6107 developed by Nanjing Tianshi not only meets the core requirements of water-based coatings and water-based varnish, but also with the properties of 100% industrial ethanol resistance, hard water resistance, low temperature resistance, acid and alkali resistance without layering after infinite thinning, and without deterioration and skinning after storing 1 year, thus greatly improving the wear resistance and scratch resistance of water-based wood coatings, water-based plastics and metal coatings. LW-102A, another waterproof wax emulsion developed by Nanjing Tianshi, is used to improve the water resistance of water-based coatings and varnish. It has very good waterproof, hydrophobic and impermeable effects in the fields like paper, wood, cement and cloth. After adding 5%-20% LW-102A to the coating, water droplets can form perfect lotus leaf-like effects on the surface of the coating, and will not permeate to the back of the coating within 2 hours. Chemical fabric soaked in the system containing 20% LW-102A also has very good hydrophobic effects after drying, and there is no residual water after water flows over the surface of the cloth.

Related News

  • Yarn smoothing agent wax emulsion LW-109C 2022-11-16
    Technical Parameters Nature of the Products LW-109C Appearance off- white emulsion pH 3-6 Solid content 40% Ionic nature Non Sample Support Cellulose (mainly cotton and linen) and its ...
  • Sasolwax C80 vs TP-80B 2022-05-20
    SASOLWAX C80 is an additive offered by Sasol. Sasolwax C80 is supplied in the form of white pastilles packed in 20kg paper bags or 600kg Jumbo bags. In the form of coarse powder packed in 20kg paper b...
  • The hazards of foam from water-based paint 2021-08-29
    Following are 5 hazards of foam from water-based paint: 1, When using paint through spraying, rolling or silk-screening, etc., internal foam appears, which affects product quality 2, Foam prevents t...
  • Reasons for bubbles in the coating during construction 2021-08-29
    For the reason that the coating is easy to produce bubbles during the construction process, we discuss in three steps (1) How does the vapor bubble in the coating film arise? Vapor bubble is the ga...
  • Causes of water-based paint foaming 2021-08-29
    In fact, these foams are mainly caused by mixing, equipment, added additives, raw materials and other reasons. If these foams are not treated, it will have an impact on the quality, appearance, cost, ...

Leave a message

Contact Us
Your name(optional)

* Please enter your name
* Email address

Email is required. This email is not valid
* How can we help you?

Massage is required.
Contact Us

We’ll get back to you soon

Done