How To Choose Anti-rust Wax Emulsion For Steel Strips

In the process of metal processing and storage, rust prevention is a crucial link. As a highly effective protective product, anti-rust wax emulsion for steel strips can effectively resist environmental corrosion and extend the service life of metal products. This article will explain in detail how to choose a suitable anti-rust wax emulsion for steel strips.

1. Clarify application requirements
Before choosing anti-rust wax emulsion, you must first clarify your specific needs:
Protection level: Determine the required protection level according to the storage environment (such as humidity, salt spray concentration, etc.);
Processing requirements: Consider the requirements of subsequent processing technology for the coating, such as whether good smoothness is required;
Appearance requirements: Choose whether to improve glossiness based on product positioning;

2. Key performance indicators
Adhesion: High-quality wax emulsion should have excellent adhesion to ensure that the coating is not easy to fall off;
Salt spray resistance: Choose products with excellent salt spray resistance, especially for use in coastal or industrial areas;
Abrasion resistance: Good anti-friction performance can ensure that the coating is intact during transportation and processing;
Elasticity: Excellent elasticity can adapt to the thermal expansion and contraction of metals to prevent cracking of the coating;

3. Technical parameters

Solid content: 30±1% solid content can ensure the formation of a dense protective film;

PH value: 7.0-9.0 neutral to weak alkaline, friendly to metal surfaces;

Melting point: 138℃ solid wax melting point, ensuring stability under normal conditions;

Chemical composition: A combination of high-density polyethylene wax and acrylic resin, providing double protection;

4. Construction precautions

Proportion control: Strictly follow the water-wax ratio of 2-3:1 to ensure that the solution viscosity is moderate;

Equipment cleaning: Thoroughly clean the container tank before use to prevent contamination from affecting the effect;

Baking process: Adjust the baking time according to the dilution ratio, 10-40 seconds at 150℃-250℃;

High-quality anti-rust treatment can not only protect your metal products, but also save you long-term maintenance costs. Choose the right anti-rust wax emulsion to put on reliable “protective clothing” for your metal products, so that they can stay in the best condition in various environments.