2022-01-21 Pageview:275
Polyethylene wax (PE wax), also known as polymer wax for short. It is widely used because of its excellent cold resistance, heat resistance, chemical resistance and wear resistance. In normal production, this part of wax can be added directly to polyolefin processing as an additive, which can increase the gloss and processing performance of the product.
1. Concentrated masterbatch and filled masterbatch are used as dispersant agent in color masterbatch processing and widely used in polyolefin masterbatch. It has good compatibility with polyethylene, polyvinyl chloride, polypropylene and other resins, and has very excellent external lubrication and internal lubrication.
2. PVC profile, pipe, compound stabilizer is used as dispersant, lubricant and brightening agent in PVC profile, pipe, pipe fitting, PE.PP molding process to enhance the degree of plasticization, improve the toughness and surface smoothness of plastic products. And it is widely used in the production of PVC compound stabilizer.
3. ink light resistance and good chemical properties, can be used as a carrier of pigments, can improve the wear resistance of paints and inks, improve the dispersion of pigments and fillers, has a good anti-settling effect, can be used as a leveling agent of paints and inks, so that products have a good gloss and three-dimensional sense.
4. Wax products are widely used in the production of floor wax, car wax, varnish wax, candles, crayons and other wax products to improve the softening point of wax products and increase their strength and surface gloss.
5. Cable material is used as the lubricant of cable insulation material, which can enhance the diffusion of filler, improve the extrusion rate, increase the flow of mold, and facilitate the demoulding.
6. Hot melt products are used in various hot melt adhesives, thermosetting powder coatings, road marking paint, delineation paint, as dispersant, with good anti-settling effect, and make the products have a good gloss and three-dimensional sense.
7. Rubber as rubber processing additives, can enhance the diffusion of filler, improve the rate of extrusion molding, increase the flow of the mold, mold release convenience, improve the surface brightness and smoothness of the product after the release of the film.
8. Cosmetics make the products have good gloss and three-dimensional sense.
9. Injection molding saves machine power lubrication effect and enhances the surface gloss of products.
Leave a message
We’ll get back to you soon