Powder Coating Does Not Contain Fluorine Texture Agent

Powder coating is a rapidly developing coating variety, but the application of powder coating still has some limitations. It cannot obtain a smooth coating surface and thin coating thickness like liquid coating, which limits the use of powder coating on many high-end products.

Secondly, the manufacturing process of fluorine-containing powder coating is more complicated and the cost of the materials required is higher; a large amount of chemical substances are required in the production process, which may produce toxic waste, poor environmental protection, and have a negative impact on the environment.

For this reason, Tianshi New Materials has developed a [Fluorine-free Sand Grain Agent for Powder Coating]:

Fluorine-free sand grain agent for powder coating minimizes environmental impact and improves product performance to meet current challenges. This solution has been successful in replacing PE/PTFE additives.

Advantages of Fluorine-free Sand Grain Agent for Powder Coating:

1. The usage is the same as the fluorine-containing type, and the amount added is a little larger, but its unit price is lower, and it can pass the detection of fluorine content, so it can completely replace the traditional fluorine-containing polymer compound sand grain texture additive.
2. Additives are added to thermosetting powder coatings to block the fluidity of the powder coating when it is melted, adjust the surface tension of the coating, and make the coating form a fine sand texture effect.

Fluorine-free sand texture agent for powder coatings is suitable for being added to thermosetting powder coatings to block the fluidity of the powder coating when it is melted, adjust the surface tension of the coating, and make the coating form a fine sand texture effect; it can be added to powder coatings that are required to be halogen-free to achieve a fine sand texture effect.