Introduction of CLARIANT E wax

2021-12-14   Pageview:59

Appearance : Light yellow powder
Acid value [mg KOH/g]: 15 – 20
Saponification value [mg KOH/g]: 140 – 160
Dropping point [°C]: 79 – 83
Viscosity [mPa-s]: ~ 20
Density [g/cm3] : ~ 1,02

CLARIANT E wax is a hard partially saponified montan ester wax with excellent retention of solvent, suitable for the production of various types of flooring, leather shoes, furniture, etc. solvent-based polish with high gloss. It can be used as a lubricant in plastic molding process, both internal and external lubrication, especially for PVC molding process, which can improve the smoothness and gloss of the finished products and improve the appearance, and also as a rubber processing aid to improve the extrusion molding speed, increase the flow of the mold and facilitate the demolding.

 

 

 

 

 

 

 

 

 

 

 

 

 

Pigments can be divided into two categories from the appearance of achromatic pigments (achromatic pigments) and color pigments. Achromatic pigments refer to white and black:

Coating and film properties
And various shades of gray pigments between white and black.
toughness
One film is flat and one weather resistance is coated with pattern powder to store the relative density of powder. The tactical color pigments refer to pigments of various colors other than the polytetrafluoroethylene powder formula black and white series.

The color of a pigment is an important technical indicator that indicates a pigment. The variety of colors is endless. Simple classification can be roughly divided into red, pigment and filler content to powder coatings and orange, yellow, green, blue, purple, and white. What’s interesting is that the effects of coating film performance between them do not exist in isolation. There is a certain internal relationship between various colors. Each color can be determined by three parameters, namely hue, saturation and lightness.

Hue is the color of each other. The characteristics of mutual difference, the color tone is determined by the spectral composition of the light source and the ratio of the radiation of each wavelength reflected by the surface of the object to the human eye. The color tone reflects the “quality” relationship of the color. Brightness is the human eye’s bright perception of an object, which is affected by visual perception and past experience. Saturation is the color purity expressed on the basis of hue “quality”, so saturation is also called “chroma”. The hue, lightness and saturation of the color can be represented by Munsell color chart. The three colors of red, yellow and blue are the primary colors and cannot be decomposed by themselves. If the three colors are mixed with each other, the ratio can be changed. A variety of colors, the color formed by mixing two different colors with each other is called “intermediate color” or “secondary color”, for example, red and yellow are mixed into “orange”; yellow and blue are mixed into “green”; red and blue are mixed The color formed by “purple” and two different secondary tones is called “composite color” or “third color”. For example, orange and green are mixed into “lemon color”: green and purple are mixed into “olive color” “Wait. According to the principle of toning, different colors can be prepared as needed.

*
*

Leave a message

Contact Us
Your name(optional)

* Please enter your name
* Email address

Email is required. This email is not valid
* How can we help you?

Massage is required.
Contact Us

We’ll get back to you soon

Done