Take Advantage of Flakes Pe Wax – Read These 8 Tips

2021-04-15   Pageview:924

Features
Polyethylene wax is a kind of chemical material. The color of polyethylene wax is small white beads/flakes. It is formed by ethylene polymer rubber processing agent. It has high melting point, high hardness, high gloss, and white color.

Physical characteristics

TEST ITOM UNIT TEST RESULT TEAT METHOD
VISCOSITY 149℃ CP 19.4 ASTM D 3236
DENSITY g/cm3 0.93 ASTM D 1505
DROPPING POINT C 115 ASTM D 3954
PENETRATION INDEX 4 ASTM D 1321
WHITENESS(WI) 85 ASTM D 1544


Advantage in Application

1. Color masterbatch and filling masterbatch.
It is used as a dispersant in the processing of color masterbatches and is widely used in polyolefin masterbatches. It has good compatibility with polyethylene, polyvinyl chloride, polypropylene and other resins, and has excellent external and internal lubrication.
2. PVC profiles, pipes, stabilizers
Used as dispersants, lubricants and brighteners in the molding process of PVC profiles, pipes, pipe fittings, PE, PP to enhance the degree of plasticization, and improve the toughness and surface smoothness of plastic products . And it is widely used in the production of PVC compound stabilizer.
3. Inks
Good light resistance and chemical properties. It can be used as a pigment carrier, can improve the abrasion resistance of paints and inks, and improve the dispersion of pigments and fillers. It has a good anti-settling effect. It can be used as a flattening agent for paints and inks.
4. Wax products
Flakes Pe Wax are widely used in the production of various wax products such as floor wax, car wax, glazing wax, candles, crayons, etc. To increase the softening point of wax products, increase their strength and surface gloss.
5. Cable material
Used as a lubricant for cable insulation materials, can enhance the diffusion of fillers, increase the extrusion molding rate, increase mold flow, and facilitate demolding.
6. Hotmelt products
Used in various hot-melt adhesives, thermosetting powder coatings, road marking paints, marking paints, as a dispersant, has a good anti-settling effect, and gives the products a good gloss and three-dimensional effect.
7. Rubber
As a rubber processing aid, it can enhance the diffusion of fillers, increase the extrusion molding rate, increase mold flow, facilitate mold release, and improve the surface brightness and smoothness of the product after film release.
8. Cosmetics
Make products have good gloss and three-dimensional effect.

*
*

Leave a message

Contact Us
Your name(optional)

* Please enter your name
* Email address

Email is required. This email is not valid
* How can we help you?

Massage is required.
Contact Us

We’ll get back to you soon

Done