After the cheese yarn is dyed or pretreated, the waxes and oils on the surface will be destroyed, making the yarn dry, the friction coefficient increases, and the hand feel becomes hard. The quality of the yarn directly affects the subsequent winding and weaving processes. The use of wax emulsion in the post-processing of cheese can reduce the frictional resistance of the yarn, reduce the breakage rate, effectively improve the efficiency of the winding and weaving processes, and ensure product quality.
Wax Emulsion OE-6803C is especially suitable for cotton cheese yarn finishing. After finishing, the fabric has good softness and smoothness, and the inner, middle and outer layers have good uniformity.
Product physical indexes:
Product Name: Wax Emulsion OE-6803C
Appearance: white emulsion
pH value: 5.0～6.0
Solubility: easily soluble in water
Wax emulsion OE-6803C was prepared with 20g/L sample solution with tap water, placed at room temperature for 10min observation, placed in a constant temperature water bath at 40~80℃, kept warm for 30~60min, and observed the phenomenon.
Sample name: Wax Emulsion OE-6803C
Initial configuration stability: stable
Temperature stability: no floating oil, no floating floc
Wax Emulsion OE-6803C prepares 20g/L sample solution with tap water, adjusts the pH to 4~5 with glacial acetic acid, observes at room temperature for 10min, puts it into a constant temperature water bath at 40~80℃, keeps warm for 30~60min, and observes the phenomenon.
Sample name: Wax Emulsion OE-6803C
Initial stability: stable
Temperature stability: no oil drift, no delamination
Wax emulsion OE-6803C has good stability in temperature resistance and acid resistance.
Product application effect:
1. Use process and conditions
Wax Emulsion OE-6803C: 1.5~2% (o.w.f)
2. Use effect
(1) After the cheese is treated with wax emulsion OE-6803C, the smoothness of the yarn is increased, thereby improving the frictional resistance between the yarn and the yarn, the yarn and the yarn guide during weaving, reducing the winding and End breakage during weaving improves work efficiency.
(2) After the package yarn is treated with wax emulsion OE-6803C, it can be evenly adsorbed on the entire surface of the yarn, so that the inner, middle and outer layers of the yarn have good uniformity, and it is not easy to break the yarn during weaving.
Product performance summary:
Ø Give cotton cheese a smoother, fluffy and softer hand;
Ø Low yellowing, very suitable for finishing white/light-colored fabrics;
Ø Self-dispersing properties, no need for emulsifier, easy to use and cost saving;
Ø It can reduce the frictional resistance of the yarn and reduce the end breakage rate;
Ø Has excellent stability and can be used under different finishing conditions;
Ø It is suitable for dipping and spraying process, and has a wide range of applications.
Ø The residual alkali and instability of textiles and the pH value of water will affect the finishing effect. It must be cleaned before finishing.
Ø The water used in the working fluid should be tap water of ≤200ppm, and the groundwater or river water should be treated and reused.
Ø Pay attention to observe the usage in the rolling groove: when there are too many burrs, pay attention to changing the material to clean the rolling groove.
Ø This product is a weak cationic product. If anionic products such as coatings and adhesives are used in the chemical tank, it needs to be cleaned and recycled.
Although softener emulsions are compatible with most cationic and nonionic adjuvants, to be on the safe side, they must be tested for compatibility before mixing. The stability of emulsions can also be affected under extreme conditions.
Leave a message
We’ll get back to you soon